black friday- CODE friday25

Your shopping cart

Shopping cart is empty.
Cart

rim backing rubber 30mm x 16

Brands: MEFO
close

No manufacturer or supplier information was found.

SKU: MFB16.30

Width mm 30Universal useMaterial rubberPacking by the pieceInfo rim: 2,15 - 2,50 ", tyres: 100 / 80-16Mounting:Before putting the tube into the rim, m Show all

Online

10 pieces

from 23. 11. at your place
Prodejna Jinín

10 pieces

Available immediately

25% off all in-stock items on orders over €85 with code FRIDAY25

2.12 €
(2.12 €/pcs)
Width mm 30
Universal use
Material rubber
Packing by the piece
Info rim: 2,15 - 2,50 ", tyres: 100 / 80-16

Mounting:
Before putting the tube into the rim, make sure the rim edges are not sharp or crooked, must not be corroded. Do not allow the wheel wires to protrude through the rim, or cover them with backing rubber. Remove dirt with fine sandpaper. Take extra care when fitting, do not use sharp objects - screwdriver etc. You could cut through the soul. Put the valve into the hole in the rim and secure with a nut, check that the valve fits well and then tighten the nut. Gradually push the tube into the tire on both sides while pressing the edge of the tire over the inside of the rim. Then inflate the tire and thoroughly check all sides for leaks. Do not overinflate the tyre! Check the valve for air leaks, replace the valve insert if necessary, remembering that the valve must always be perpendicular to the top.

Maintenance:
Check the tyre pressure continuously, replace the tube if defective.
NEED ADVICE?
Vlasta chalupný
Sales Representative and Support Specialist
728 453 162 

Our Store

Plenty of products and friendly, knowledgeable staff.

Not far from Strakonice, in the small village of Jinín next to the world-famous motocross track, you'll find our MEFO store. Here, you'll always be welcomed by friendly, easy-going staff who are ready to help you throughout your visit.

arrow1 arrow1