Mefo mousse 90/100-20 side BIG
Supplier/manufacturer details
Name: Mefo Sport GmbH
Address:
Röthlein
97520
Německo
Phone: 00499723919115
MEFO MOUSSE BIG Side nahrazuje klasickou duši v pneumatice motokrosové sajdkáry. Konstrukce BIG je určena pro pneumatiky s širší vnitřní kostrou.
-
Konstrukce BIG
-
Pro pneumatiky 90/100-20
-
Určen pro motokrosové sajdkáry
-
Bez nutnosti huštění
-
Eliminuje riziko defektu
MEFO MOUSSE Standard BIG
A version designed for tyres with a larger carcass. It ensures proper seating of the mousse and optimal handling characteristics in tyres with a larger internal volume.
MEFO MOUSSE Standard BIG specifications
Construction: Traditional round profile for tyres with a larger internal volume
Use: Motocross, enduro and off-road
Features: Balanced combination of traction, stability and durability
Manufactured in: Germany
MEFO MOUSSE – an alternative to conventional inner tubes
MEFO MOUSSE replaces the conventional inner tube. It requires no inflation and eliminates the risk of punctures and pinch flats. It is designed for use in motorcycle tyres according to the specific mousse type and size.
MEFO MOUSSE is developed, tested and manufactured by MEFO Sport in Germany. The products are also tested under demanding racing conditions.
Package contents
- 1× MEFO MOUSSE
- 1× original MEFO Mousse Gel for initial installation
The supplied amount of gel is intended for one complete lubrication of a single mousse.
Proper lubrication and maintenance
MEFO MOUSSE must always be adequately lubricated. Proper lubrication reduces friction inside the tyre and helps limit heat build-up in the material.
MEFO MOUSSE must always be as slippery as a slug.
Insufficient lubrication increases friction and operating temperature. It can accelerate wear and cause the material to crumble, negatively affecting the performance and service life of the mousse.
During each installation, check the condition of the mousse, clean it and thoroughly relubricate it with the original silicone-based MEFO Mousse Gel.
Manufacturer's recommendations
- Do not exceed the maximum speed of 130 km/h.
- Avoid prolonged riding on asphalt, which increases the operating temperature of the mousse and accelerates its wear.
Proper storage
After removal, store the mousse in a dry place, away from direct sunlight and ideally at a constant temperature of up to 30 °C. Avoid prolonged exposure to high temperatures or significant temperature fluctuations.
Installation
Installing MEFO MOUSSE is more demanding than fitting a conventional inner tube and requires experience, the correct procedure and suitable tools. If you have no experience with mousse installation, we recommend using a professional workshop or consulting the MEFO MOUSSE technical guide.
Installation warning
During installation, take care not to damage the mousse with a tyre lever or cut it against the rim edge. Such damage can cause premature deterioration of the material and significantly shorten the service life of the mousse. Use suitable tyre-fitting tools and proceed carefully.
Material: Special rubber compound developed by MEFO Sport.
Recommended additional purchase
More information about mousse
Our Store
Not far from Strakonice, in the small village of Jinín next to the world-famous motocross track, you'll find our MEFO store. Here, you'll always be welcomed by friendly, easy-going staff who are ready to help you throughout your visit.



