Mefo mousse 110/90-19 Groove
Supplier/manufacturer details
Name: Mefo GmbH
Address:
Röthlein
97520
Německo
Phone: +499723919120
- Groove design with longitudinal grooves
- Side reinforcement for greater stability in the tire
- For rear tires 110/90-19
MEFO MOUSSE Groove
MEFO MOUSSE Groove is a new generation of mousse featuring longitudinal grooves that promote air circulation, reduce heat build-up and help maintain consistent handling characteristics under prolonged loads. It is primarily designed for motocross.
MEFO MOUSSE Groove specifications
Construction: Longitudinal grooves that promote air circulation
Use: Primarily motocross
Features: Reduced heat build-up and consistent handling characteristics under prolonged loads
Manufactured in: Germany
Grooved construction
The longitudinal grooves promote air circulation inside the tyre and help reduce heat build-up in the mousse while riding. The construction is designed to contribute to consistent handling characteristics, even under prolonged loads.
MEFO MOUSSE – an alternative to conventional inner tubes
MEFO MOUSSE replaces the conventional inner tube. It requires no inflation and eliminates the risk of punctures and pinch flats.
MEFO MOUSSE is developed, tested and manufactured by MEFO Sport in Germany. The products are also tested under demanding racing conditions.
Package contents
- 1× MEFO MOUSSE
- 1× original MEFO Mousse Gel for initial installation
The supplied amount of gel is intended for one complete lubrication of a single mousse.
.jpg)
Proper lubrication and maintenance
MEFO MOUSSE must always be adequately lubricated. Proper lubrication reduces friction inside the tyre and helps limit heat build-up in the material.
MEFO MOUSSE must always be as slippery as a slug.
Insufficient lubrication increases friction and operating temperature. It can accelerate wear and cause the material to crumble, negatively affecting the performance and service life of the mousse.
During each installation, check the condition of the mousse, clean it and thoroughly relubricate it with the original silicone-based MEFO Mousse Gel.
Manufacturer's recommendations
- Do not exceed the maximum speed of 130 km/h.
- Avoid prolonged riding on asphalt, which increases the operating temperature of the mousse and accelerates its wear.
Proper storage
After removal, store the mousse in a dry place, away from direct sunlight and ideally at a constant temperature of up to 30 °C. Avoid prolonged exposure to high temperatures or significant temperature fluctuations.
Installation
Installing MEFO MOUSSE is more demanding than fitting a conventional inner tube and requires experience, the correct procedure and suitable tools. If you have no experience with mousse installation, we recommend using a professional workshop.
Installation warning
During installation, take care not to damage the mousse with a tyre lever or cut it against the rim edge. Such damage can cause premature deterioration of the material and significantly shorten the service life of the mousse. Use suitable tyre-fitting tools and proceed carefully.
Material: Special rubber compound developed by MEFO Sport.
Recommended additional purchase
More information about mousse
| Použití | zadní |
|---|---|
| Rozměr v palcích: | 19 |
| Typ produktu | MOUSSE |
| Rozměr | 110/90-19 |
| Vhodné pro | motokros |
| Terén | bláto , kámen , písek , střední , trvrdý provrch |
Our Store
Not far from Strakonice, in the small village of Jinín next to the world-famous motocross track, you'll find our MEFO store. Here, you'll always be welcomed by friendly, easy-going staff who are ready to help you throughout your visit.



