LOWER FORK COVERS fits on KTM EXC / EXCF 16/22, SX / SXF 15/22, HQ 15

Acerbis fork guards form the first line of defence for some of the most exposed components of a motorcycle's front suspension. Stones, mud, sand, branches and track debris are constantly thrown towards the forks during motocross and enduro riding, making intact guards far more than a purely visual part of the bike.

When an original fork guard becomes cracked, badly damaged or completely missing, the exposed fork area receives less protection from direct impacts and abrasive contamination. Stones can leave marks and scratches, while mud and fine dirt may accumulate around moving parts and seals. Over time, repeated exposure can contribute to unnecessary wear and make proper suspension maintenance even more important.

A replacement pair of Acerbis fork guards restores the protective barrier around the exposed lower fork area. Their purpose is simple: take part of the punishment before stones, roost and debris can strike the suspension components directly.

Continuing to ride with broken plastic can create further problems of its own. A crack may spread, sections can gradually break away and sharp edges may develop. The motorcycle also begins to look incomplete, even when the rest of the bodywork is still in good condition. Replacing only the affected guards provides a straightforward way to restore both protection and appearance without purchasing an entire plastic kit.

Acerbis fork guards are developed for specific motorcycle applications. Their shape follows the intended fork and bodywork layout of each bike and uses the corresponding mounting locations. Choosing the correct application eliminates the need to cut, drill or force a universal plastic part into place.

Real off-road conditions demand a careful balance between rigidity and flexibility. Fork guards face vibration, impacts, mud, water and repeated mechanical stress on every ride. The plastic therefore needs to retain its form while still coping with the punishment associated with motocross, enduro and trail riding.

Replacing worn guards can also make a surprisingly large visual difference during the restoration of an older motorcycle. The fork area sits directly at the front of the bike and heavily scratched, faded or broken plastics are immediately noticeable. A new set can refresh this section of the motorcycle without disturbing bodywork that is still perfectly serviceable.

On mefoshop.com is range of motorcycle fork guards and protectors for numerous makes, models and model years. For larger repairs or full bodywork restoration, explore the complete selection of motorcycle plastics, including fenders, radiator scoops, side panels, front number plates, airbox covers and other replacement components.

Key benefits:

• replace cracked, damaged or completely missing original fork guards,

• reduce direct exposure of the fork area to stones, mud and track debris,

• help protect exposed suspension components from scratches and impacts,

• model-specific shape for the intended motorcycle application,

• designed around the appropriate mounting locations,

• combine the rigidity and flexibility required for off-road conditions,

• withstand regular vibration and mechanical stress,

• allow only the damaged plastics to be replaced instead of purchasing a full kit,

• restore a complete and well-maintained appearance to the front of the motorcycle,

• suited to motocross, enduro and other off-road use depending on the specific application,

• manufactured in Italy.

For motorcycles requiring a more extensive rebuild, browse the selection of complete plastic kits, which allow several worn or damaged bodywork components to be renewed together.

Why protect the forks:

The front suspension is not an area where unnecessary damage should be ignored. During off-road riding, the forks operate in an environment filled with stones, mud, sand and abrasive debris. A single impact may not cause an immediate failure, but repeated exposure can leave marks and contribute to long-term wear.

Properly installed fork guards provide a straightforward layer of protection between this environment and the exposed fork area. It is a relatively simple component performing a very specific job on every ride.

Why Acerbis:

Acerbis has been involved in the motorcycle industry since 1973, building particularly strong roots in motocross, enduro and other off-road disciplines. These are environments where plastics regularly face vibration, crashes, impacts, mud and dust.

Replacement bodywork is therefore developed with more than appearance in mind. Shape, rigidity, flexibility and the ability to cope with mechanical stress all matter. Acerbis fork guards are designed to replace original plastic components while providing practical protection for an exposed section of the front suspension.

Development and manufacturing:

Acerbis plastic components are manufactured in Italy and draw on more than fifty years of experience in motorcycles and motorsport. Product development takes real riding conditions into account, with materials expected to deal with repeated vibration, mechanical loading and harsh environments.

Always check motorcycle make, exact model and model year in the product application table before ordering.